Description
Use on: Every exterior or interior surface made of concrete, brick, wood, metal, where hydro insulation is needed.
Application: Apply by roller, brush or spray gun. Apply the first coat horizontally, then the second one vertically (with 90 o angle of the first coat)
Packing: It is available in 750ml 3L and 10L pails.
Thinning: First coat is diluted with 50% clean water, while the second coat needs no dilution and is spread in the opposite direction of the first one.
Coverage: 5m²/L on properly prepares surfaces, depending on the surface texture and the method of application.
Drying time: 3-4 hours depending on the atmospheric conditions.
Recoat: After 6-8 hours. Under cooler or humid conditions, allow longer times.
Colour shades: ROOF SEALER is produced in white and can be coloured according to Daylux’s “D-MIX” Tinting System.
Note: Tools must be cleaned immediately after use with water and if neededwith soapy water or a detergent. Temperature must be above 5°C during application and drying time.
Surfaces should be clean, dry and smooth, free from dust, grease loose or flaking paint. Use DAYLUX's Acrylic Putty to fill any cracks or holes. New surfaces made of plaster, concrete, cement, stucco, rendering, plaster board etc. must first be coated with DUROLUX Primer of DAYLUX diluted 50-60% with Thinner D200.
Store in accordance with local regulations .Store in a dry ,cool and well- ventilated area. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Keep out of reach of children. Do not use empty container for storing food. Avoid contact with skin and eyes. In case of contact with skin and eyes wash immediately with soap and water. If swallowed, seek medical advice immediately and show this container
