Description
Use on: Every exterior and interior wall or surface made of concrete, plaster, wood, hardboard, asbestos cement, bricks, etc.
Application: Apply by roller, brush or airless gun spray.
Packing: It is available in 3L and 9L pails.
Thinning: Dilute with 5-10% clean water.
Coverage: 8-9m ²/Lt approximately, on properly prepared surfaces, depending on the surface texture and the method of application.
Drying time: 1-2 hours depending on the atmospheric conditions.
Recoat: After 3-4 hrs. Under cooler or humid conditions, allow longer times.
Color shades: FINE DAYCRYL is produced in white and can be colored according to Daylux’s “D-MIX” Tinting System.
Note: Tools must be cleaned immediately after use with water and if needed
with soapy water or detergent. Temperature must be above 5 °C during
application and drying time.
Ensure that the surface is in sound condition, dry, free from grease, dust, dirt, and poorly adhesive materials. On new or old surfaces, previously painted with lime, poorly adhesive coatings or poor quality paints, scrape off all loose and flaking paint and then prime with isolating acrylic primers, water based, or with DAYLUX's solvent-based primer ”DUROLUX” , thinned 100% with D200 solvent. Always stir well before use.
Store in accordance with local regulations .Store in a dry ,cool and well- ventilated area. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Keep out of reach of children. Do not use empty container for storing food. Avoid contact with skin and eyes. In case of contact with skin and eyes wash immediately with soap and water. If swallowed, seek medical advice immediately and show this container.
EU maximum VOC content limit values (Directive 2004/42/CE)for this product (category A/c “Exterior walls of mineral substrate”,Type WB): 40g/l ( (2010).This product contains maximum 29g/l VOCs (ready for use product).
