Description
Use on: Every exterior and interior surface made of concrete, plaster, wood, hardboard, asbestos cement, bricks, etc.
Application: Apply by roller, brush or airless gun spray.
Coverage: 10-12 m²/L per coat on properly prepared surfaces, depending on the surface texture and the method of application.
Drying time: 3-4 hours depending on the atmospheric conditions.
Recoat: After 4-5 hours. Under cooler or humid conditions, allow longer times.
Color Shades: SUPER DAYCRYL is produced in white and can be colored according to Daylux’s “D-Mix” Tinting System.
Note: Tools must be cleaned immediately after use with water and if needed with
detergent. Temperature must be above 5°C during application and drying time.
| Packing | Dilution | |||
| White | 1 Lt | 3 Lt | 10 Lt | 5-10% |
| Baze D | 1 Lt | 3 Lt | 10 Lt | 5% |
Ensure that the surface is in sound condition, dry, free from grease, dust, dirt and poorly adhesive materials. On new or old surfaces, previously painted with lime, poorly adhesive coatings or poor quality paints, scrape off all loose and flaking paint and prime with isolating primers of DAYLUX. Always stir well before use. Temperature must be above 5°C during application.
Store in accordance with local regulations .Store in a dry ,cool and well- ventilated area. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Keep out of reach of children. Do not use empty container for storing food. Avoid contact with skin and eyes. In case of contact with skin and eyes wash immediately with soap and water. If swallowed, seek medical advice immediately and show this container.
EU limit value for this product category A/c Exterior walls of mineral substrate: 40g/l (2010). This product contains max 14g/l VOC.
