Description
Colours: Available in grey.
Packaging: 750 mL and 2.5L.
Spreading Rate: 11 – 13 m² /L per coat on properly prepared surfaces.
Application: Apply by brush, roller or airless spray gun. Dilute with up to 5% with Nitro based solvent.
Drying Time: Touch dry after 30 – 45 minutes. Drying time varies depending on the weather conditions.
Recoat: Can be recoated after 6-8 hours. When the surface is dried completely, sand with the appropriate abrasive paper and paint the Daylux’s nitro based paints.
NOTE: Stir well before use. Temperature must be above 5°C and below 38°C during the application and drying time. Humidity level must be below 80%. Tools should be cleaned immediately after use with Daylux’s D200 solvent and then with water or detergent.
Surfaces should be cleaned with nitro based solvent, dry and smooth, free from dust, grease loose or flaking paint. Sanding is required to prepare the surface properly prior to applying NITRO PRIMER.
Store in accordance with local regulations. Store in a dry, cool and well-ventilated area. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Temperatures should be above 5°C and below 38°C during storage.
Read label before use. Keep out of reach of children. Do not use empty container for storing food. Avoid contact with skin and eyes. In case of contact with skin and eyes wash immediately with soap and water. If swallowed, seek medical advice immediately and show this container.
Viscosity 80 ± 5 KU (ASTM D 562, 25ο C) Density 1,48 ± 0,02 Kg/L (ISO 2811)
EU maximum VOC content limit values (Directive 2004/42/CE) for this product (category A/i “One-pack performance coatings”, Type SB): 500 g/L. This product contains maximum 456 g/L VOCs (ready for use product).
