Description
Use on: Metallic and wood surfaces.
Application: Apply by spray gun, roller or brush.
Packing: 900ml only.Thinning: Dilute with 10% D-200 Thinner.
Coverage: 10-12m²/Lt depending on the surface.
Drying time: After 2-3 hours depending on atmospheric conditions.
Recoat: After 20-24 hours depending on atmospheric conditions.
Note: Stir well before use. Do not apply at temperature below 5°C and /or relative humidity above 80%. Tools must be cleaned immediately after use with Daylux’s General Purpose Thinner D-200.
Surfaces to be finished should be clean, dry, free from dust and grease and prepared with proper undercoat. Metallic surfaces should be ( aluminium, galvanized steel) or plastic surfaces apply one coat Wash Primer or Daylux`s Primer for glossy Surfaces.
Store in accordance with local regulations .Store in a dry ,cool and well- ventilated area. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Flammable. Vapors may cause drowsiness or dizziness. Repeated exposure may case skin dryness or cracking. Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment
Keep out reach of children. Do not breathe vapor or spray Avoid contact with skin
Use only in well-ventilated areas. Avoid release to the environment. Refer to special
instructions/safety data sheet. If swallowed, do not induce vomiting: seek medical
advice immediately and show this container or label.
