Description
Use on: Metallic surfaces which can be either new or old (rusted).
Application: It can be applied by brush, short hair roller or spray gun.
Packing: It is available in either 750ml or 2.5Lt cans.
Thinning: Dilute 15-20% with D200.
Coverage: 8-10m²/Lt per coat, depending on film thickness on a properly prepared surface.
Drying time: 30-60 minutes depending on the atmospheric conditions.
Recoat: After 2-3 hours.
Remove loose rust or flaking paint from old, rusted or painted metallic surfaces. Use an abrasive paper to create a smooth surface to obtain maximum adhesion. When the surface is dry and clean, free from dust, rust, dirt or grease, apply 1 – 2 coats of DIRECT 3 in 1. Paint quickly and carefully to ensure proper coating of the surface and obtain complete isolation from humidity, especially in difficult to paint spots, such as corners and edges. Best protection is provided with a 100μm thick in paint film, which is formed by applying two coats of DIRECT – 3 in 1.
Store in accordance with local regulations .Store in a dry ,cool and well- ventilated area. Containers that have been opened must be carefully resealed and kept upright to prevent leakage.
Keep out of reach of children. Do not use empty container for storing food. Avoid contact with skin and eyes. In case of contact with skin and eyes wash immediately with soap and water. If swallowed, seek medical advice immediately and show this container.
