Description
Use On: It is suitable for walls and ceilings of plaster, plasterboard, bricks and it
replaces oil stuccos and similar materials
Apply With: Spatula or plaster trowel.
Packing: Only in 15kg paper sacks
Mixing: About 5.7- 6 Lt clean water per 15kg UNOPLAST. The pot life is 2-3 hours
with occasional stirring of the paste without adding water.
Coverage: About 1m²/kg per millimetre thick layer.
Drying: Touch dry in 1-2 hours. Second layer after 3-4hr. These times vary depending on weather conditions (humidity, temperature) and the thickness of the layer.
Mix in 6 lt pure water gradually in 15 kg of UNOPLAST powder, preferably with a mechanical stirrer, until it becomes homogenous. Leave the paste to rest for a bit before application. Stir regularly the paste to soften it, without further addition of water.
The material is applied with a spatula in 2 or more coats to a total thickness that is recommended not to exceed 5mm. The time between the layers should be not less than 3-4 hours, depending on the temperature and humidity of the environment.
The final layer can be sanded with fine abrasive paper after 12 hours and then dusted.
The putty is applied and allowed to dry at a temperature of 5°C to 35°C. If applied at temperatures above 35°C, before applying, the surface must be wetted with water. Dry sanding will give rise to dust. Ensure good ventilation during application and drying. Use suitable respiratory protective equipment.
In covered dry place, preferably on pallets at temperatures from 5°C to 40°C, for 12 months from date of production.
Keep out of reach of children. Avoid contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water and if necessary seek medical advice. Wear eye/face protection. If swallowed seek medical advice immediately and show this container or label. Do not empty into drains. Dispose of empty container responsibly.
